- 您现在的位置：买卖IC网 > Sheet目录1227 > MA180024 (Microchip Technology)MODULE PLUG-IN 18F46J50 FS USB
PIC18F46J50 Full-Speed USB Demonstration Board User’s Guide
In order to meet this USB suspend current requirement, a USB peripheral should be
designed so that it does not place large quiescent loads directly on the +5V V BUS
supply line from the USB port. If large loads will be supplied from the USB port, it is
suggested that they be connected in a way that they can be turned off when the USB
port is placed in the low-power suspend state.
The PIC18F46J50 Full-Speed USB Demonstration Board has been designed with
these and other power management considerations in mind.
2.2
LEDs
Two high-efficiency, red LEDs have been included on the PIC18F46J50 Full-Speed
USB Demonstration Board. The LEDs are connected to I/O pins, RE0 and RE1, and
can be used for general purpose indication. The LEDs are connected so that they
illuminate when the I/O pin controlling them is driven high.
2.3
2.4
PUSH BUTTONS
The board has two miniature push buttons. Push button, S4, connects to Master Clear
Reset (MCLR) which resets the microcontroller.
Push button, S2, provides a simple user interface for interacting with demonstration
firmware projects. Default factory firmware is installed on the board and other USB
firmware projects are available in the MCHPFSUSB Framework. (See
The push button is connected to pin RB2 on the PIC18F46J50 microcontroller which is
pulled up to V DD through a 15-k Ω resistor. Pressing the button pulls the RB2 line to
ground.
JUMPERS
2.4.1
JP2 Jumper
JP2 is a three-pin header with the labels, “I”, “R” and “U”.
? “I” – Abbreviation referring to the ICE female header pin for the RC2 signal
? “R” – Abbreviation referring to microcontroller pin, RC2
? “U” – Abbreviation for the USB_ATTACH signal (see the schematics in
When the jumper is in the “R” to “I” position, the RC2 pin connects only to the ICE
female header pin, just like most of the other general purpose I/O pins. When the
jumper is in the “R” to “U” position, RC2 can be used to sense when the USB cable has
been attached to the host and when the host is actively providing power to the +5V
V BUS line.
According to the USB 2.0 specifications, no device should ever pull the D+ or D- lines
high (such as with the D+ or D- pull-up resistor) until the host actively powers the +5V
V BUS line. This is intended to prevent self-powered peripherals from ever sourcing
even small amounts of power to the host when the host is not powered. Small amounts
of current could potentially prevent the host (and possibly other USB peripherals
connected to that host) from fully becoming depowered, which could cause problems
during power-up and initialization.
Self-powered peripherals should periodically monitor the +5V V BUS line and detect
when it is driven high. Only when it is powered should user firmware enable the USB
module and turn on the D+ (for full speed) or D- (for low speed) pull-up resistor,
signaling the device attach to the host.
DS51806A-page 11
? 2009 Microchip Technology Inc.
发布紧急采购，3分钟左右您将得到回复。
相关PDF资料
MA180028
MOD PLUG-IN PIC18F87K22 PIM
MA2-4-34-625-2-A32-7C
CIRCUIT BREAKER MAG 25A PANEL MT
MA240013
MODULE PLUG-IN PIC24 44-PIN
MA240017
MODULE PLUG-IN PIC24F16KA102 PIM
MA240021
MOD PLUG-IN PIC24FJ256GB210
MA240025-1
MOD PIM PIC24EP512GU810 GP
MA240026
MODULE PLUG-IN PIC24FJ16MC102
MA300013
MODULE DSPIC30F SAMPLE 80QFP
相关代理商/技术参数
MA180025
功能描述:子卡和OEM板 PIM for PIC18F87J90 w/ Cap Touch buttons RoHS:否 制造商:BeagleBoard by CircuitCo 产品:BeagleBone LCD4 Boards 用于:BeagleBone - BB-Bone - Open Source Development Kit
MA180026
功能描述:子卡和OEM板 PIC18F45K20 44P TQFP to 84P PIM RoHS:否 制造商:BeagleBoard by CircuitCo 产品:BeagleBone LCD4 Boards 用于:BeagleBone - BB-Bone - Open Source Development Kit
MA180027
功能描述:子卡和OEM板 PIC18F87K90 PIM w/ Cap Touch
RoHS:否 制造商:BeagleBoard by CircuitCo 产品:BeagleBone LCD4 Boards 用于:BeagleBone - BB-Bone - Open Source Development Kit
MA180028
功能描述:子卡和OEM板 PIC18F87K22 Plug-In Module
RoHS:否 制造商:BeagleBoard by CircuitCo 产品:BeagleBone LCD4 Boards 用于:BeagleBone - BB-Bone - Open Source Development Kit
MA180029
功能描述:子卡和OEM板 PIC18F47J53 FS USB Demo Board
RoHS:否 制造商:BeagleBoard by CircuitCo 产品:BeagleBone LCD4 Boards 用于:BeagleBone - BB-Bone - Open Source Development Kit
MA180030
功能描述:子卡和OEM板 PIC18F47J31 Plug-in Module RoHS:否 制造商:BeagleBoard by CircuitCo 产品:BeagleBone LCD4 Boards 用于:BeagleBone - BB-Bone - Open Source Development Kit
MA180031
功能描述:子卡和OEM板 PIC18F46K80 PIM RoHS:否 制造商:BeagleBoard by CircuitCo 产品:BeagleBone LCD4 Boards 用于:BeagleBone - BB-Bone - Open Source Development Kit
MA180032
功能描述:子卡和OEM板 PIC18F66K80 PIM RoHS:否 制造商:BeagleBoard by CircuitCo 产品:BeagleBone LCD4 Boards 用于:BeagleBone - BB-Bone - Open Source Development Kit